PRO SW-2002XLS





Description:

PRO SW-2002XLS (For Gates Up to 16 Feet OR 500 lbs per leaf) 

Improvements:

Larger, higher powered, lower RPM motor 
Reduced gear motor noise 
Increased operating speed by 10 % 
NEW rev-counter board with reed switch technology 
NEW controller with Jog Button technology used in GPX series 
Solar Compatible

Technical Specs:
Mechanical: 
The GTO/Access© control board can be programmed for pull-to-open or push-to-open. 
Operating temp: -5 F (-21C) to +160 F (71 C). 
Opening time: From 15 to 20 seconds. 
Range of arm stroke: up to 15" (38 cm). 
Operator length: with arm fully retracted is 33.75" (85.2 cm), mounting point to mounting point. 
Shipping Weights: 2000XLS Kit 31 lbs. (14 kg); Meets UPS shipping standards. 

Electrical 
12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included). Battery charge is maintained by a 14 VAC 28 VA output, transformer. 
Powered by a reliable 12 Volt DC motor 
Charging regulator circuit on control board. "Sleep draw" is 15 mA; "active draw" is 2 to 5 amps. 
Full systems capable "add on ready" heavy duty control board includes adjustable obstruction sensing, gate sequencing and autoclose settings (0-120 seconds).

Easy transmitter programming with the touch of a button.

Includes battery backup, AC transformer and all necessary mounting hardware for a post mounted installation.

Warranty:  2 Year (Single-Family Residential Application Only).  
  
  
 
  
Features:

Mechanical: 
The GTO/Access© control board can be programmed for pull-to-open or push-to-open. 
Operating temp: -5 F (-21C) to +160 F (71 C). 
Opening time: From 15 to 20 seconds. 
Range of arm stroke: up to 15" (38 cm). 
Operator length: with arm fully retracted is 33.75" (85.2 cm), mounting point to mounting point. 
Shipping Weights: 2000XLS Kit 31 lbs. (14 kg); Meets UPS shipping standards. 

Electrical 
12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included). Battery charge is maintained by a 14 VAC 28 VA output, transformer. 
Powered by a reliable 12 Volt DC motor 
Charging regulator circuit on control board. "Sleep draw" is 15 mA; "active draw" is 2 to 5 amps. 
Full systems capable "add on ready" heavy duty control board includes adjustable obstruction sensing, gate sequencing and autoclose settings (0-120 seconds).

Easy transmitter programming with the touch of a button.

Includes battery backup, AC transformer and all necessary mounting hardware for a post mounted installation.

Warranty:  2 Year (Single-Family Residential Application Only).